Product Name: 12 LED Lighting System Kit
Material: Plastic
Number of LED bulbs: 12
Operating Current: 100mA
Input Voltage: 4.8V - 6.0V
Light Colors: White, red, yellow, blue
Connection Method: CH1 - Servo, CH2 - Speed controller, CH3 - Receiver
Suitable for: 1/10 scale RC cars
LED Cable Length: Approximately 300mm
 
The dimensions of the circuit board are 55*35*15.8mm. It weighs 60g. Description of lights: There are 4 white LED lights for the headlights. Connect the lighting system to CH3 on the receiver: the transmitter can control one group of lights independently, while another group of lights turn on when the car speeds up. If not connected to CH3 on the receiver, one group of lights remains on constantly, while another group turns on when the car speeds up. There are also 4 yellow LED lights for the turn signals.
Use the remote control to change the direction, and the lights will flash in sync. The taillights consist of 2 blue LED lights and 2 red LED lights. The blue lights are constantly on. They turn off when the car accelerates or brakes. The red lights only turn on when braking. Installation Instructions: For CH2 Transmitter, connect the servo and ESC plugs to CH1 and CH2 on the lighting system, then connect CH1 and CH2 to the receiver. For CH3 Transmitter:
Plug the servo and ESC into CH1 and CH2 on the lighting system, and then connect CH1, CH2, and CH3 to the receiver.